White Oak – Natural – 7309N
PRODUCT OVERVIEW
White Oak – Natural (engineered white oak flooring) is dense, light, porous and open grain. It is resistant to rot, and is suitable for water-holding applications.
- 20 Years Residential Limited Warranty
- Staple Down over wood or plywood sub-floor, or fully spread glued down over concrete slat (with adhesive recommended by FERMA).
- 2mm wear layer
- 5″ width

SPECIFICATIONS
Flooring Type
Prefinished Engineered Glue Down Flooring type describes the flooring category. Every flooring category suits specific room design need.
Collection
Precision Collections breaks down flooring type according to wood species.
Grade/Series
N/A Series breaks down collection according to construction type or price range.
Warranty
20 Years Residential Limited Warranty Warranty describes the warranty Ferma Flooring provides to each flooring type.
Finish
Aluminum Oxide The protective surface coating found on all flooring.
Hardness
N/A The density/hardness of the wood species and its ability to withstand foot traffic, children and pets will impact its wear performance, and will vary from species to species.
DIMENSIONS
SQFT/CTN
29.53
Length
Random (12"-48")
Width
5"
Thickness
1/2"
LOOK
Edge
Micro-beveled Describes the way the hardwood and laminate board edges and ends are cut.
Surface Style
Smooth There are three type of surface style: smooth, handscraped, wire brushed.
Gloss Level
55-60% Gloss describes the shiny coating that adds a polished look to the floor’s surface. Every flooring category (hardwood, vinyl, laminate) offers gloss levels (high, medium, low) from which to choose based on your room design and lifestyle.
INSTALLATION
Installation Level
On or Above Groud There are 3 different floor levels: above grade, on grade, and below grade.
Installation Method
Staple Down over wood or plywood sub-floor,Or fully spread glued down over concrete slat (with adhesive recommended by FERMA) There are typically five installation methods: nail down, glue down, floating with glue, click-Locked, floating by clicking.
Acclimation
5-7 days The amount of time needed for adjusting to the surrounding environment in the room.
Additional Information

The T-Molding helps you seamlessly transition between your floor areas of the same height.

The T-Molding helps you seamlessly transition between your floor areas of the same height.

The reducer is used when transitioning from a higher flooring surface, such as wood or laminate, to a lower flooring surface.
Available in: Bamboo, Engineered Hardwood, Laminate, Luxury Vinyl Plank, Luxury Vinyl Tile, Solid Handscraped Hardwood, Solid Hardwood

The stair nose molding (i.e. stair nose) sits at the edge of the stair steps to round out the edges for safety and aesthetic reasons.
Available in: Bamboo, Engineered Hardwood, Laminate, Luxury Vinyl Plank, Luxury Vinyl Tile, Solid Handscraped Hardwood, Solid Hardwood
Certificates
The California Composite Wood Products Regulation (CWP Regulation) specifically focuses on three products: hardwood plywood (HWPW), particleboard (PB), and medium density fiberboard (MDF). The regulation requires finished goods to be made with HWPW, PB, and MDF that comply with the regulatory requirements and to be labeled as such.
The ISO 9000 family addresses various aspects of quality management and contains some of ISO’s best-known standards. The ISO 14000 family of standards provides practical tools for companies and organizations of all kinds looking to manage their environmental responsibilities. FERMA's flooring manufacturers are ISO 9001 certified, ISO 14001 certified, or both respectively.